Page 1 of 2
Made a few Changes
Posted: Sun Oct 02, 2011 7:22 am
by Mr Dean
Re: Made a few Changes
Posted: Sun Oct 02, 2011 7:29 am
by f2uk
Personally I think it is a vast improvement .... nice one!
So what are the wheels from or did you have them made up?
Re: Made a few Changes
Posted: Sun Oct 02, 2011 7:36 am
by Jim Lovell
Very nice Dean, looking very mean

Re: Made a few Changes
Posted: Sun Oct 02, 2011 8:25 am
by Steve T
Ace work you Farkler you! :whistle:
Now, get out there and get it dirtier than it is by heading north with that Gorilla that does your farkling, and I'll show you some Highland dirt
Steve T
B)
Re: Made a few Changes
Posted: Sun Oct 02, 2011 1:13 pm
by Gaffer64
Hi,
Nice looking bike. I have the same one and colour. Can you list the parts you have added, and what tyres you have on it. I am still not overly happy with the bike. It seems ok on the road at speed, but slow speed needs lots of rear brake and slipping the clutch. I couldn't imagine it off road. Any tips or advice would be great. Well done with your bike.
Cheers
Mike G.
Re: Made a few Changes
Posted: Sun Oct 02, 2011 1:59 pm
by Mark1961
I am also interested in what tyres you have on there?

Re: Made a few Changes
Posted: Sun Oct 02, 2011 3:52 pm
by Mr Dean
f2uk wrote:Personally I think it is a vast improvement .... nice one!
So what are the wheels from or did you have them made up?
Ok wheels,
rear BMW F800Gs standard 17" sourced from James Sherlock (new and used parts) this was used having done about 7k miles
Front BMW F650GS single 19" 2007 model sourced from Ebay friends spotted it knew I was looking and gave me the heads up. but it was the wrong colour I wanted black

So Hagons the local wheel and shock builder stripped the plasic coating off of the hub and powder coated them and added heavy duty stainless steel spokes with nickel nipples.
the whole idea came from fellow riders accross the pond Canada and USA it so happens that the F650GS twin for the wheels from F650GS single front and F800GS rear use same spindle, spacers, ABS ring, Brake disc, wheel bearings right down to exacting part numbers.
Re: Made a few Changes
Posted: Sun Oct 02, 2011 3:53 pm
by Mr Dean
Jim Lovell wrote:Very nice Dean, looking very mean

Very Mean

B) :woohoo:
subliminal message for Jim M O R O C C O :whistle: :woohoo: :woohoo: :woohoo: :woohoo:
Re: Made a few Changes
Posted: Sun Oct 02, 2011 3:55 pm
by Mr Dean
Steve T wrote:Ace work you Farkler you! :whistle:
Now, get out there and get it dirtier than it is by heading north with that Gorilla that does your farkling, and I'll show you some Highland dirt
Steve T
B)
I was thinking the same :laugh: I washed it yesterday so its ready for some dirt :woohoo:
Re: Made a few Changes
Posted: Sun Oct 02, 2011 4:03 pm
by Mark1961
Mark1961 wrote:I am also interested in what tyres you have on there?

and the tyres?........................... :whistle: