Adventure Bike Rider Forum

SteveW wrote:Can anyone recommend me a tough topbox?
My bike has the ccm rack for the soft luggage fitted.

I just got this one Steve for the new Donkey, here it is on the bike.

http://www.ebay.co.uk/itm/361741704679? ... EBIDX%3AIT

SteveW,
Holan in Poland do a fairly well made compact topbox.
There are no fixings with them so you need to make an aluminium plate to go between the box and the rack, Simple job.
Regards

minkyhead wrote:there was a bad shortage of e09s in 18 rims last year the 17s wernt a problem i was importing them from serbia ? trellesport had them back in stock a couple of months ago

its getting very exciting ..shes on her way ....all dressed up and ready to braaaaaaap (thumbs)

DSC_0302 by minkyhead56, on Flickr[/img]

I fear you won't get far with that front wheel!

Pelicase on the CCM...

Similar Pelicase on mine:

Fitted the Supermoto wheels, WP forks and lovely red anodised yokes to the wife's GP450. First impressions are it' significantly lower and feels like a different bike. It will take a while to get used to the tipping in on tight corners. I think the smaller fatter wheels really suit the low suspension model.

Jon

Post man delivered a nice parcel from BB engineering in Oz today, for a husky terra drilled out some holes for the Ccm luggage bolts otherwise perfect fit. Quality rack plate. Also made and fitted a side stand assist thingy because when I've got the enduristans on I can't reach the thing. For front tie loops I butchered some cb125 rear rest brackets. Also put a led headlight bulb in, so a Productive couple of days!

Maljones wrote:Post man delivered a nice parcel from BB engineering in Oz today, for a husky terra drilled out some holes for the Ccm luggage bolts otherwise perfect fit. Quality rack plate. Also made and fitted a side stand assist thingy because when I've got the enduristans on I can't reach the thing. For front tie loops I butchered some cb125 rear rest brackets. Also put a led headlight bulb in, so a Productive couple of days!

IMG_0983.JPG

IMG_0986.JPG

IMG_0998.JPG

IMG_0976.JPG

What LED bulb did you fit please. I am not particularly worried about extra night time vision but as my headlight comes on with the ignition i would like something that takes less power and will pass an MOT without having to change back to a halogen bulb. I have a DRZ 400 with an H4/

Led was off eBay comes with adaptors for different bulb sizes, only cheap as I didn't want to spend too much because not tried them before. Not really tried it pitch dark bit seems to have a good dip cut off line ( I hope it's good on the road because the bulb is a pain to get at) , i don't have the link for it but it is triangle shape with 3 leds 30w. Very bright, with the Ccm gp reflector seems to give a good beam and definitely less power as the charge rate is higher when running.

I have looked at BB engineering website,it looks very good and i have ordered things from the USA but never Australia.I might give them a try.