what have you done to your bike today??

[The Wilbur]

Fitted the base for Tank Bag, & seat after Viking Vinyl had done the magic.

http://www.viking-motorcycle-seats.co.uk

102_1094.JPG (53.27 KiB) Viewed 997 times

102_1092.JPG (58.14 KiB) Viewed 997 times

Flat, firm and anti-slip vinyl (thumbs)

[Loggy]

Spent 6 hours washing and polishing the Africa Twin after two weeks of wet, dirt filled roads made it look like I'd been to Siberia.

Now all shiney and greased up! :whistle:

[XF650]

Iridium plugs for the VX800 and XF650. 2 minute job on the XF but spent an hour on the VX cos the cap rubbers were burnt/glued to the deep deep recesses. What a pain! :blink:

[coyotedave]

Not my bike but Michelle's BMW G650 X Country. Fitted Hepco Becker pannier frames and rack, wolfman bags to frames, Isota tinted screen, And give it a clean an polish. All ready for the boil rally next weekend.


Cheers Dave

[Rederic]

Found some 10 mm dia tube, bashed it into shape

SMALL.jpg (37.83 KiB) Viewed 997 times

SMALL3.jpg (33.45 KiB) Viewed 997 times

Bronze welded some feet on it

ASASA.jpg (27.61 KiB) Viewed 997 times

Melted a bit of powder on it

SMALL2jpg.jpg (31.88 KiB) Viewed 997 times

Bolted it on to the top of my top box, thought it will be handy for my wet gear (thumbs)

[johnzxr750]

:woohoo: me and lonepilgrim went for a bimble this evening round the singletrack roads of the wolds making it up as we went along

20140508_205440.jpg (51.64 KiB) Viewed 997 times

20140508_205522.jpg (38.04 KiB) Viewed 997 times

Lone pilgrim featured
cheers john (thumbs)

[vacant_space]

Spent 6 hours washing and polishing the Africa Twin after two weeks of wet, dirt filled roads made it look like I'd been to Siberia.

Now all shiney and greased up! :whistle:

Next stop, Siberia eh Loggy

[vacant_space]

Put it's scarf on, packed it's sarnies and rode it in for MOT tomorrow...

Miss it already

Guess I'll either be pleasantly surprised / unpleasantly horrified, or somewhere in between tomorrow... :unsure:

MaydayTwin.jpg (58.18 KiB) Viewed 997 times

[ysbytymike]

*Changed the pegs on the @ to wider and shorter.
*Stripped the front callipers to clean and check everything was working.

*Stripped the oil reservoir off the BSA B31 and gave the internal a good clean with gunk and water ready to try to get her started after some time of just sitting in my garage.

Been a nice day just getting those jobs you keep putting off for one reason or another done.

[Mike101]

Found a queak and rattle from the front end on my K100 that i cannot find the source of.

It's only there while i am doing over 20 mph...finding it will be hard.

Mike