Will someone please buy this of Russ before he changes his mind and keeps,
I believe there is a cruiser, leather chaps and vest with his name on.
When you have that itch mate it's got to scratched
Really just a long winded bump
ccm 644 Tet bike.....sold awaiting payment..
-
- Posts: 2145
- Joined: Sun Jan 08, 2012 11:44 am
- Has thanked: 803 times
- Been thanked: 534 times
Re: ccm 644 Tet bike.....
Okay.....
This bike is back up for sale as I ve bought a xt660z so..
its a heavily moddified ccm644 ...
wiring sorted , rear weak subframe sorted has rallyraid fairing and vapour dash along with adjustable bar risers ...comes with a box of spares inc indicators,air filter and wheel bearings ,oil filters and seals and various sprockets..16+51...runs a 520 chain too..
its done 23000mls and had a replacement barrel and piston fitted off a 5,000 mls bike and new valves and seals and manual camchain adjuster fitted all this was done at 19000 mls when the auto adjuster failed and caused havoc...
it has custom side racks and a pelicase copy ..seat has been modded by local guy...its a 2004 bike thats been used in europe and uk so no show case but does what it was made for...
Price is ..........£1200 no offers .....has mot till April 2019 and the mitas e07 are half worn..
im based in southampton but shiply can transport it anywhere for a reasonable price..
This bike is back up for sale as I ve bought a xt660z so..
its a heavily moddified ccm644 ...
wiring sorted , rear weak subframe sorted has rallyraid fairing and vapour dash along with adjustable bar risers ...comes with a box of spares inc indicators,air filter and wheel bearings ,oil filters and seals and various sprockets..16+51...runs a 520 chain too..
its done 23000mls and had a replacement barrel and piston fitted off a 5,000 mls bike and new valves and seals and manual camchain adjuster fitted all this was done at 19000 mls when the auto adjuster failed and caused havoc...
it has custom side racks and a pelicase copy ..seat has been modded by local guy...its a 2004 bike thats been used in europe and uk so no show case but does what it was made for...
Price is ..........£1200 no offers .....has mot till April 2019 and the mitas e07 are half worn..
im based in southampton but shiply can transport it anywhere for a reasonable price..
-
- Posts: 4790
- Joined: Fri Dec 28, 2012 10:47 pm
- Location: Limousin France
- Has thanked: 2452 times
- Been thanked: 3293 times
- chunky butt
- Posts: 2036
- Joined: Thu Nov 13, 2014 10:39 pm
- Has thanked: 54 times
- Been thanked: 699 times
Re: ccm 644 Tet bike.....
few things I forgot..
its had new oil and filter recently like 250mls ago...has the oilite swing arm bush conversion and a grease nipple in the bolt so lasts for years not months..comes with a normal ccm front headlight cowl in yellow with lens...
had a new jt front sprocket fitted along with new chain and a sprocket retaining disc thingy I always use locktite.
The side stand bolts are high tensile upgrades as they snap or vibrate out...mine wont lol.
The wiring around the headstock has been protected so no chaffing
The bike pulls cleanly from 3000rpm to above 6000rpm loads of low down grunt with no flat spots...ticks over sweatly at 1500rpm I average 160mls from a 13.5 ltr tank and tend to use 98 octane as the bike runs smoother...but 95 is fine ..
ive replied to folks pm`s too...
its had new oil and filter recently like 250mls ago...has the oilite swing arm bush conversion and a grease nipple in the bolt so lasts for years not months..comes with a normal ccm front headlight cowl in yellow with lens...
had a new jt front sprocket fitted along with new chain and a sprocket retaining disc thingy I always use locktite.
The side stand bolts are high tensile upgrades as they snap or vibrate out...mine wont lol.
The wiring around the headstock has been protected so no chaffing
The bike pulls cleanly from 3000rpm to above 6000rpm loads of low down grunt with no flat spots...ticks over sweatly at 1500rpm I average 160mls from a 13.5 ltr tank and tend to use 98 octane as the bike runs smoother...but 95 is fine ..
ive replied to folks pm`s too...