ccm gp 450 happy day

[boboneleg]

Can anyone recommend me a tough topbox?
My bike has the ccm rack for the soft luggage fitted.

I just got this one Steve for the new Donkey, here it is on the bike.

http://www.ebay.co.uk/itm/361741704679? ... EBIDX%3AIT

MCCCirencester005.JPG (64.58 KiB) Viewed 3556 times

[Avion100]

SteveW,
Holan in Poland do a fairly well made compact topbox.
There are no fixings with them so you need to make an aluminium plate to go between the box and the rack, Simple job.
Regards

[chrisjk]

there was a bad shortage of e09s in 18 rims last year the 17s wernt a problem i was importing them from serbia ? trellesport had them back in stock a couple of months ago

its getting very exciting ..shes on her way ....all dressed up and ready to braaaaaaap (thumbs)

DSC_0302 by minkyhead56, on Flickr[/img]

I fear you won't get far with that front wheel!

[Paul_C]

Pelicase on the CCM...

[PaulinBont]

Similar Pelicase on mine:

20170326_142601.jpg (111.37 KiB) Viewed 3556 times

[jonny955]

Fitted the Supermoto wheels, WP forks and lovely red anodised yokes to the wife's GP450. First impressions are it' significantly lower and feels like a different bike. It will take a while to get used to the tipping in on tight corners. I think the smaller fatter wheels really suit the low suspension model.

Jon

[Maljones]

Post man delivered a nice parcel from BB engineering in Oz today, for a husky terra drilled out some holes for the Ccm luggage bolts otherwise perfect fit. Quality rack plate. Also made and fitted a side stand assist thingy because when I've got the enduristans on I can't reach the thing. For front tie loops I butchered some cb125 rear rest brackets. Also put a led headlight bulb in, so a Productive couple of days!

IMG_0983.JPG (43.11 KiB) Viewed 3556 times

IMG_0986.JPG (48.06 KiB) Viewed 3556 times

IMG_0998.JPG (88.74 KiB) Viewed 3556 times

IMG_0976.JPG (59.7 KiB) Viewed 3556 times

[frenchy3]

Post man delivered a nice parcel from BB engineering in Oz today, for a husky terra drilled out some holes for the Ccm luggage bolts otherwise perfect fit. Quality rack plate. Also made and fitted a side stand assist thingy because when I've got the enduristans on I can't reach the thing. For front tie loops I butchered some cb125 rear rest brackets. Also put a led headlight bulb in, so a Productive couple of days!

IMG_0983.JPG

IMG_0986.JPG

IMG_0998.JPG

IMG_0976.JPG

What LED bulb did you fit please. I am not particularly worried about extra night time vision but as my headlight comes on with the ignition i would like something that takes less power and will pass an MOT without having to change back to a halogen bulb. I have a DRZ 400 with an H4/

[Maljones]

Led was off eBay comes with adaptors for different bulb sizes, only cheap as I didn't want to spend too much because not tried them before. Not really tried it pitch dark bit seems to have a good dip cut off line ( I hope it's good on the road because the bulb is a pain to get at) , i don't have the link for it but it is triangle shape with 3 leds 30w. Very bright, with the Ccm gp reflector seems to give a good beam and definitely less power as the charge rate is higher when running.

[frenchy3]

I have looked at BB engineering website,it looks very good and i have ordered things from the USA but never Australia.I might give them a try.