i need to put my new chain on and was wondering if anyone had a splitter/riveter i could borrow? somewhere in the southampton area would be good
cheers
Chain splitter/riveter wanted to borrow in Hampshire
-
- Posts: 1044
- Joined: Mon Mar 14, 2011 1:00 pm
-
- Posts: 49
- Joined: Thu Oct 07, 2010 9:50 pm
Re: Chain splitter/riveter wanted to borrow in Hampshire
If you get no offers in Southampton - feel free to pop over to me in Lymington
Re: Chain splitter/riveter wanted to borrow in Hampshire
For splitting use a small disc grinder or dremel
For riveting learn to user a hammer as you may need to do it on the side of a trail :blink:
For riveting learn to user a hammer as you may need to do it on the side of a trail :blink:
Re: Chain splitter/riveter wanted to borrow in Hampshire
hi Chris..
how quick do you need it..as I`m not back until next Sunday..its a splitter and riveter..the hein gerrik type for 520/525 chains..does yours have the soft rivet link?
how quick do you need it..as I`m not back until next Sunday..its a splitter and riveter..the hein gerrik type for 520/525 chains..does yours have the soft rivet link?
-
- Posts: 1044
- Joined: Mon Mar 14, 2011 1:00 pm
Re: Chain splitter/riveter wanted to borrow in Hampshire
I'd prefer to do it properly rather than bodge it or use a split link, and keep my split link for repairs. Cheers for the offer stormforce will keep it in mind. Russ I've got the link that came with the 520 chain. Won't realistically be doing it this weekend as got to install my new rad
Chris
G650 X-Challenge
'91 XTZ750
G650 X-Challenge
'91 XTZ750
Re: Chain splitter/riveter wanted to borrow in Hampshire
okay Chris..when I`m back and hopefully the cast is off on Monday the 24th sept means I can ride the bike again so could pop over the following weekend to give you a lift etc..
I just use a hand file to well file the soft rivet off flush on old chain and then push the pins through..
The chain tool has the adapter to push the new plate on over the x rings and then turn it round and squash the soft rivet head...normally 30-40 mins from start to finish :whistle: ..
send me a email or pm if thats okay..
I just use a hand file to well file the soft rivet off flush on old chain and then push the pins through..
The chain tool has the adapter to push the new plate on over the x rings and then turn it round and squash the soft rivet head...normally 30-40 mins from start to finish :whistle: ..
send me a email or pm if thats okay..
-
- Posts: 1044
- Joined: Mon Mar 14, 2011 1:00 pm
Re: Chain splitter/riveter wanted to borrow in Hampshire
Cheers russ pm sent
Chris
G650 X-Challenge
'91 XTZ750
G650 X-Challenge
'91 XTZ750
Re: Chain splitter/riveter wanted to borrow in Hampshire
You can get a good one for £30-£40 and handy to have as you never know when you might need one in the future or out on a ride.
Took mine with me on a trip to France and used it to repair and refit my chain.
Took mine with me on a trip to France and used it to repair and refit my chain.