NC750X start up and end message on dash

If you know how to do something, share it with other members. i.e How to fix a puncture...How to ship a bike to Alaska etc. The post with the most 'Thank You' votes in a month wins an ABR Hoodie.
Post Reply
Jamesgb
Posts: 4
Joined: Mon Oct 21, 2019 3:07 pm
Location: Ayr

NC750X start up and end message on dash

Post by Jamesgb »

Hello
On the NC750X you can set your message to show on the dash at start up and end.

I have done this, BUT, unfortunately have entered an extra letter at the end. Instead of James, it says Jamess

I cannot find any instructions in the handbook on how to erase the extra letter, or reset everything to start again.

Anyone know how you do this.
Richard Simpson Mark II
Posts: 3516
Joined: Tue May 09, 2017 9:03 pm
Has thanked: 1413 times
Been thanked: 1668 times

Re: NC750X start up and end message on dash

Post by Richard Simpson Mark II »

Crikey...on my bikes I just put the key in the ignition, turn it, then press the starter button.

Actually, that's not true for all of them. I just set the choke and kick the Gas Gas over.
Trev
Posts: 997
Joined: Wed Jul 30, 2014 11:52 am
Has thanked: 104 times
Been thanked: 160 times

Re: NC750X start up and end message on dash

Post by Trev »

Ha ha, a proper first world problem, I'm lucky if the dash on any of my bikes shows a fuel gauge! Have a look on the excellent NC owners forum, I'm sure someone there will be able to help:

http://www.nc700.co.uk
Post Reply

Return to “HOW TO..........”