Page 2 of 3
Re: for sale ....ccm644ds tet bike
Posted: Sun May 13, 2018 10:07 am
by zimtim
Will someone please buy this of Russ before he changes his mind and keeps,
I believe there is a cruiser, leather chaps and vest with his name on.
When you have that itch mate it's got to scratched
Really just a long winded bump
Re: for sale ....ccm644ds tet bike
Posted: Sun May 27, 2018 6:19 pm
by Tramp
.
Re: for sale ....ccm644ds tet bike
Posted: Sun May 27, 2018 9:14 pm
by diggermanbob
Tramp wrote: ↑Sun May 27, 2018 6:19 pm
Removed from sale........
Good news
Re: ccm 644 Tet bike.....
Posted: Tue Oct 16, 2018 9:39 am
by Tramp
Okay.....
This bike is back up for sale as I ve bought a xt660z so..
its a heavily moddified ccm644 ...
wiring sorted , rear weak subframe sorted has rallyraid fairing and vapour dash along with adjustable bar risers ...comes with a box of spares inc indicators,air filter and wheel bearings ,oil filters and seals and various sprockets..16+51...runs a 520 chain too..
its done 23000mls and had a replacement barrel and piston fitted off a 5,000 mls bike and new valves and seals and manual camchain adjuster fitted all this was done at 19000 mls when the auto adjuster failed and caused havoc...
it has custom side racks and a pelicase copy ..seat has been modded by local guy...its a 2004 bike thats been used in europe and uk so no show case but does what it was made for...
Price is ..........£1200 no offers .....has mot till April 2019 and the mitas e07 are half worn..
im based in southampton but shiply can transport it anywhere for a reasonable price..
Re: ccm 644 Tet bike.....
Posted: Tue Oct 16, 2018 12:10 pm
by daveuprite
What a bargain!
Good luck with the sale, Russ.
Re: ccm 644 Tet bike.....
Posted: Tue Oct 16, 2018 12:17 pm
by chunky butt
Lot of bike there for the money Russ.....glws
Re: ccm 644 Tet bike.....
Posted: Tue Oct 16, 2018 8:56 pm
by jasext
Sent you pm to ring me please mate
Re: ccm 644 Tet bike.....
Posted: Wed Oct 17, 2018 8:29 am
by Tramp
few things I forgot..
its had new oil and filter recently like 250mls ago...has the oilite swing arm bush conversion and a grease nipple in the bolt so lasts for years not months..comes with a normal ccm front headlight cowl in yellow with lens...
had a new jt front sprocket fitted along with new chain and a sprocket retaining disc thingy
I always use locktite.
The side stand bolts are high tensile upgrades as they snap or vibrate out...mine wont lol.
The wiring around the headstock has been protected so no chaffing
The bike pulls cleanly from 3000rpm to above 6000rpm loads of low down grunt with no flat spots...ticks over sweatly at 1500rpm I average 160mls from a 13.5 ltr tank and tend to use 98 octane as the bike runs smoother...but 95 is fine
..
ive replied to folks pm`s too...
Re: ccm 644 Tet bike.....
Posted: Mon Oct 22, 2018 8:12 pm
by Tramp
Monday evening bump.....
Replacement bike arrives shortly
Re: ccm 644 Tet bike.....
Posted: Sat Oct 27, 2018 9:38 am
by Tramp