xt660z rear rack ..wanted

[motorbike]

as in the title....along the toura/tach rugged road type...thanks

[Gary117]

Try these good bit of kit

http://www.altechdesigns.co.uk/11-luggage-racks

[rodyorkabr]

http://shaw2shore.co.uk/video-gallery/#bwg2/6] 4mins22seconds
I would have no hesitation in recommending Altechdesigns....the owner helped me out at short notice and recommended the kit that would do the job....and its seriously good kit...the delivery time was even better!....FANTASTIC GEAR!

[felco]

Hi motorbike.
its a fairly easy job making a rack for the tenere as it can be flat, no bending or welding required, you just need some spacers to lift it, I made my own out of a piece of aluminium and painted it to stop it dirtying everything, only cost me my time and a can of paint, I had the ally but small pieces can be bought on ebay ext. Easy job

20150426_192139.jpg (39.8 KiB) Viewed 1559 times

[cozi70]

As felco says. Fellow before me made this one from a piece of alloy and some spacers,which means I could mount any makers plate and box.
Here's a Honda one.