The Suzuki DR thread.

boboneleg · Post by **boboneleg** » Mon Dec 04, 2017 12:27 pm

The one you sold to me was on my old bike when I sold it. The guy that I bought my new bike off was selling a B&B rack but that was a while ago, I could probably find his details if you want to give it a shot?

BobH · Post by **BobH** » Mon Dec 04, 2017 1:53 pm

Yes Please Bob, thanks.

boboneleg · Post by **boboneleg** » Mon Dec 04, 2017 5:59 pm

BobH wrote: ↑Mon Dec 04, 2017 1:53 pm Yes Please Bob, thanks.

PM sent.

Andi_Archer · Post by **Andi_Archer** » Mon Dec 04, 2017 6:33 pm

I might be looking for a rack myself whats the one your taking off?

BobH · Post by **BobH** » Mon Dec 04, 2017 6:59 pm

: IMG_0227.JPG (253.74 KiB) Viewed 2024 times

Andi, it is the Borrego Cargo Rack. Take a look on Procycle website. I have added a bar to hold the indicators as per the image attached.

Andi_Archer · Post by **Andi_Archer** » Mon Dec 04, 2017 7:23 pm

Hmm,,,,, interesting what sort of price if your selling?

Thedktor · Post by **Thedktor** » Sat Jan 06, 2018 9:37 am

The Sarge wrote: ↑Tue Apr 18, 2017 5:03 pm
EDIT

I just found the Chinese ones, I can't compete with that price :laugh:

http://www.ebay.co.uk/itm/Speedo-Gear-S ... SwhQhYx6XB

Bob, Mad Hatter I ordered one and it arrived today, took about 3 weeks from Chinky Chong but it looks well made, I' ll let you know how it goes when I fit it (thumbs)

Sarge
[/quote]

Well, my plastic drive finally gave up after many years use, so what's the verdict on the chinese cheapy one?

willywombat64 · Post by **willywombat64** » Sat Jan 06, 2018 2:09 pm

Hi all ,
I'm currently making a few alterations to Bob's Doris MK5 that I bought a few months back whilst I wait for health issues to hopefully resolve so I can
actually get out and ride it . I quite fancy doing a few mods/farkles like fitting a kickstart etc but will wait till I've fallen in love before shelling out too much .
Anyhow ..could anyone advise about headlamp protectors for the DR350 SE ? iI've seen the odd one or two on photos but wondered if there are any inexpensive choices or advice re DIY ? It's the mesh/grill type I like the look of but don't have a welder for fabrication or probably the skill to do a good job. Here's one i didn't knock up earlier , incorporating a rack , albeit fitted to a serow by Dave Lambeth . A simple grill and no rack would suffice though.

Also any recommendation re small screens up front?
thanks in advance
Bill in exeter

boboneleg · Post by **boboneleg** » Sat Jan 06, 2018 8:59 pm

I've got this one hung up in the garage Bill, it was made by a mate of mine. Not a very good photo but it's about the only one I've got.

: snow ride 13.01.10 021.jpg (106.89 KiB) Viewed 1888 times

Mad Hatter · Post by **Mad Hatter** » Sat Jan 06, 2018 9:57 pm

Thedktor wrote: ↑Sat Jan 06, 2018 9:37 am
The Sarge wrote: ↑Tue Apr 18, 2017 5:03 pm
EDIT

I just found the Chinese ones, I can't compete with that price :laugh:

http://www.ebay.co.uk/itm/Speedo-Gear-S ... SwhQhYx6XB

Bob, Mad Hatter I ordered one and it arrived today, took about 3 weeks from Chinky Chong but it looks well made, I' ll let you know how it goes when I fit it (thumbs)

Sarge

Well, my plastic drive finally gave up after many years use, so what's the verdict on the chinese cheapy one?
[/quote]

Not entirely sure, the sec one I used worked but the hub ended up knackered, I think its unrelated, I got a sec hub off Bob and didn't have any luck so I got a trail tech vapor that's waiting to go on once I got my new lights, Montana unit and idiot lights.

The Suzuki DR thread.

Re: The Suzuki DR thread.

Re: The Suzuki DR thread.

Re: The Suzuki DR thread.

Re: The Suzuki DR thread.

Re: The Suzuki DR thread.

Re: The Suzuki DR thread.

Re: The Suzuki DR thread.

Re: The Suzuki DR thread.

Re: The Suzuki DR thread.

Re: The Suzuki DR thread.