Looks like it's time for a new master cylinder on my old airhead boxer been leaking for a while & considering the bike's over 30 years old it's not worth trying to overall it.
So bit the bullet & ordered a new one today + a few other bits ( £175) !
Once that's fitted next job is gearbox out to fit a new output shaft seal that looks like it's leaking .
Ian
Master cylinder
-
- Posts: 316
- Joined: Sat Aug 06, 2011 4:46 pm
- Has thanked: 8 times
- Been thanked: 56 times
-
- Posts: 316
- Joined: Sat Aug 06, 2011 4:46 pm
- Has thanked: 8 times
- Been thanked: 56 times
Re: Master cylinder
Hopefully the photos are back working !
- Attachments
-
- IMG_20190115_151518.jpg (71.82 KiB) Viewed 1424 times
-
- IMG_20190115_151537.jpg (71.07 KiB) Viewed 1424 times
-
- Posts: 316
- Joined: Sat Aug 06, 2011 4:46 pm
- Has thanked: 8 times
- Been thanked: 56 times
Re: Master cylinder
New master cylinder arrived this morning & now all back together .
Ian.
Ian.
- Attachments
-
- IMG_20190117_155204.jpg (73.96 KiB) Viewed 1393 times
-
- Posts: 298
- Joined: Fri Jul 01, 2016 1:56 pm
- Location: Ger Abergwaun
- Has thanked: 8 times
- Been thanked: 101 times
Re: Master cylinder
I was trying to get my head around the picture , until I realised that the reservoir, body and lid are resting on a plastic freezer box that the fluid is draining into. I rebuilt one of these on a 1978 RT boxer last year, it all cleaned up very well, bearing in mind that the bike had been off the road for 15 years , with no prep. The brake fluid had all turned to jelly!