I've acquired some GS spoked wheels with the plan of putting some 50/50 tyres on them. The idea being I can switch to these wheels when doing more trails than tarmac.
I'm just wondering what, if anything I might do to refurb them before I put them on. Not sure how but someone has managed to catch a fair few kerbs with them. They have a few scuffs and I was also wondering if powder coating is an option? On the other hand I'm not sure if there's any point. They're for function not aesthetics after all.
Does anyone else who tried this with their GS have any advice? By the looks of things I need some longer bolts for the rear and I'm guessing buying replacement tyre sensors is optional?
Cheers
Dan
Spruce up spoked wheels
Re: Spruce up spoked wheels
So I got some really helpful advice from Eddie at Hagon Wheels, who were recommended by a Horizons Unlimited article on maintaining these wheels. For the standard non-anodized wheels I should be able to get them ground and polished by any willing car alloy wheel repairer.
However, after discovering two loose spokes I now have bigger problems. I'm concerned these wheels aren't true. If they're not sounds a costly job to get them rebuilt and I'll have made a big mistake in buying them.
Does anyone know someone in the Yorkshire area who I could take these wheels to and check if they are sound? Or should I just stick them on the bike and see for myself?
However, after discovering two loose spokes I now have bigger problems. I'm concerned these wheels aren't true. If they're not sounds a costly job to get them rebuilt and I'll have made a big mistake in buying them.
Does anyone know someone in the Yorkshire area who I could take these wheels to and check if they are sound? Or should I just stick them on the bike and see for myself?
Re: Spruce up spoked wheels
hi dan, iam doing the same thing as i just bought a brand new set of alloy wheels off ebay with roads tyres and i have the same spokes as the pic,s on my gs, but would like to powder coat the rims black, not to sure it would be to much work as these are a bugger to respoke i have heard
steve
steve
Re: Spruce up spoked wheels
Dont bother, if you get a puncture and need to repair them youll kill any finish you lovingly put on changing the tube in the field!
just put knobblies on and be happy, you likely scratch you bike a few times anyway!
The knobblies should be covered in mud most the year as well!
just put knobblies on and be happy, you likely scratch you bike a few times anyway!
The knobblies should be covered in mud most the year as well!
Re: Spruce up spoked wheels
Yeah, I'm leaning toward that line of thinking to be fair Cone. I've got a nice shiny pair of cast wheels to be clean when on tarmac.
So slightly bashed and mucky wheels will be fine but loose spokes and a potentially wobbly wheel is a little more concerning!
So slightly bashed and mucky wheels will be fine but loose spokes and a potentially wobbly wheel is a little more concerning!
Re: Spruce up spoked wheels
I've used Paul Jackson at outlane Huddersfield to rebuild my Z1 wheels top job and a decent price
- SHarper
- Posts: 1354
- Joined: Wed May 08, 2013 8:18 am
- Location: Sheffield
- Has thanked: 427 times
- Been thanked: 904 times
Re: Spruce up spoked wheels
I used to spruce up the spokes on my Raleigh Chipper with the tops off of the bread wrappers, coupled with a lollipop stick to click along in the spokes it was the dogs danglies...
Sorry if that's no help whatsoever.
Sorry if that's no help whatsoever.
Re: Spruce up spoked wheels
these are meant to be tubeless, hence spokes are on outer part of the rims. also, spokes need maintenance retigting, rarely but they doCone wrote:Dont bother, if you get a puncture and need to repair them youll kill any finish you lovingly put on changing the tube in the field!
just put knobblies on and be happy, you likely scratch you bike a few times anyway!
The knobblies should be covered in mud most the year as well!