Page 1 of 6

ABR Stickers

Posted: Wed Jan 05, 2011 5:55 pm
by JimboF650
:( Just received 2 ABR stickers for the bike, but they not seem to be sticky (no adhesive). Anyone else had the same issue? - Still they were free.

Re: ABR Stickers

Posted: Wed Jan 05, 2011 6:09 pm
by sparks
mine were very hard to peel of the backing as it kept separating but when i got it of it was sticky

Re: ABR Stickers

Posted: Wed Jan 05, 2011 6:28 pm
by JimboF650
Cheers - I'll give them another go

Re: ABR Stickers

Posted: Wed Jan 05, 2011 6:44 pm
by JimboF650
VICTORY!!! took at bit of doing, but it now has pride of place on the bike! :-)

Re: ABR Stickers

Posted: Wed Jan 05, 2011 7:06 pm
by mark1150
JimboF650 wrote::( Just received 2 ABR stickers for the bike, but they not seem to be sticky (no adhesive). Anyone else had the same issue? - Still they were free.
The easiest way to separate the sticker from it's backing is to use the blade of a Stanley knife, i.e. separate them by using the fine edge between the two.
Hope this helps,
Mark.

Re: ABR Stickers

Posted: Wed Jan 05, 2011 8:13 pm
by Jayrob
How do you get these stickers?

Re: ABR Stickers

Posted: Wed Jan 05, 2011 8:58 pm
by Oldbikerboy
Just email your details to Emily address below.

emily@adventurebikerider.com

Re: ABR Stickers

Posted: Wed Jan 05, 2011 9:06 pm
by CRAIGREVO
mark1150 wrote:
JimboF650 wrote::( Just received 2 ABR stickers for the bike, but they not seem to be sticky (no adhesive). Anyone else had the same issue? - Still they were free.
The easiest way to separate the sticker from it's backing is to use the blade of a Stanley knife, i.e. separate them by using the fine edge between the two.
Hope this helps,
Mark.
No putting it in water is the easiest way and safest. ;)

Re: ABR Stickers

Posted: Thu Jan 06, 2011 5:38 pm
by mark1150
CRAIGREVO wrote:
mark1150 wrote:
JimboF650 wrote::( Just received 2 ABR stickers for the bike, but they not seem to be sticky (no adhesive). Anyone else had the same issue? - Still they were free.
The easiest way to separate the sticker from it's backing is to use the blade of a Stanley knife, i.e. separate them by using the fine edge between the two.
Hope this helps,
Mark.
No putting it in water is the easiest way and safest. ;)
To be honest I wouldn't have even thought of that method as an option, but to be fair I've never found using the Stanley dangerous, I make Mrs H do it for me, :lol:
Good tip mate.

Re: ABR Stickers

Posted: Fri Jan 07, 2011 8:09 am
by john_aero
how much are they or are the really free?