Search found 1127 matches

by Cone
Wed Sep 11, 2019 4:30 pm
Forum: BIKES
Topic: Husqvarna 701
Replies: 266
Views: 27358

Re: Husqvarna 701

Think I’ve come to the reason why they have warped Went down to Phil’s this year wheee the clutch slave failed, we found a slave from an old blown up husky engine he had in his bike torture pit under the house. This permanently disengaged the clutch so we have to fabricate a spacer froma bit of his ...
by Cone
Wed Sep 11, 2019 3:37 pm
Forum: BIKES
Topic: Husqvarna 701
Replies: 266
Views: 27358

Re: Husqvarna 701

Greetings, I love these technical brain teasers, so long as they are not on my bike :roll: I had enough of that following a faulty ignition switch scenario :shock: I dare say that you have looked through the internet but here is a selection of what might be some interesting links to checking if you...
by Cone
Mon Sep 09, 2019 9:24 pm
Forum: BIKES
Topic: Husqvarna 701
Replies: 266
Views: 27358

Re: Husqvarna 701

http://www.husky701.com/husqvarna-701-clutch-modifications/ alternatives seem to be a recluse clutch, extra friction disc, or stronger springs? video shows replacing the friction discs with new, and putting in stronger springs .. watched the video .. was wondering if, like the crf250L, replacing th...
by Cone
Mon Sep 09, 2019 5:38 pm
Forum: BIKES
Topic: Husqvarna 701
Replies: 266
Views: 27358

Re: Husqvarna 701

Asgard wrote:
Mon Sep 09, 2019 4:59 pm
The middle plates look to have been overheated, whether thats a cause or an effect i dunno, do you ride a lot of slow technical stuff?
I do yes! Some single track lanes in south wales. Big rocky hill climbs

Or they are to me anyway!!
by Cone
Mon Sep 09, 2019 12:22 pm
Forum: BIKES
Topic: Husqvarna 701
Replies: 266
Views: 27358

Re: Husqvarna 701

I did have the dreaded slave failure, the dealer told me no need to replace the oil but I have anyway although about 1k miles later due to being in france. Yes I used the right oil. Could the middle discs be contaminated in fluid?
by Cone
Sun Sep 08, 2019 4:04 pm
Forum: BIKES
Topic: Husqvarna 701
Replies: 266
Views: 27358

Re: Husqvarna 701

Greetings, I wonder if the problem might be with the clutch adjustment. I recall somebody mentioning that they traced their problem to an overfilled master cylinder or sticking slave cylinder piston :?: TTFN Hugh. Thanks Hugh but I’m not sure about this, reason being after I changed the slave after...
by Cone
Sat Sep 07, 2019 10:42 pm
Forum: BIKES
Topic: Husqvarna 701
Replies: 266
Views: 27358

Re: Husqvarna 701

Yes they are the only sign of wear is paint rub. I’ve stumped up reluctantly for a full ebc kit, but I’m confused to how this will fix it as everything is within tolerance.. It could be just cheap crap installed by Husky. It wouldn’t surprise me so far the clutch is by far the weakest component on t...
by Cone
Sat Sep 07, 2019 7:52 pm
Forum: BIKES
Topic: Husqvarna 701
Replies: 266
Views: 27358

Re: Husqvarna 701

1754BBBE-7A12-429F-A8F0-3C07082361F1.jpeg
1754BBBE-7A12-429F-A8F0-3C07082361F1.jpeg (113.63 KiB) Viewed 114 times
The only telling sign is black plates in the centre. Like they are overheating
by Cone
Sat Sep 07, 2019 6:58 pm
Forum: BIKES
Topic: Husqvarna 701
Replies: 266
Views: 27358

Re: Husqvarna 701

So I’m about to have another gripe of this bikes unreliability. My clutch started slipping again. I replaced the springs a few months ago when it was slipping before which cured the problem My clutch plates tolerance is greater than 2.5 they are 2.67 The springs are tone within 31.5 and 33mm in leng...
by Cone
Fri Sep 06, 2019 12:54 pm
Forum: CLOTHING
Topic: Knox clothing
Replies: 4
Views: 343

Re: Knox clothing

I’ve got an alpine stars body armour with mesh and it’s great. Totally converted in summer

Go to advanced search